搜索历史清除全部记录
最多显示8条历史搜索记录噢~
全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

+
  • ivdshowr.png

Poly(A)尾酶检测试剂盒

Poly(A)尾酶检测试剂盒,Poly(A) Tailing Enzyme Test kit,非常适合用于在使用高产T7 ARCA (m)RNA 合成试剂盒体外转录生成的 (m)RNA 转录本的 3' 端添加聚(A)尾。更多视频请关注视频号【艾维缔】。哔哩哔哩【IVDSHOW】。抖音【军哥聊表观】。


关键词

Poly(A)尾酶检测试剂盒


所属分类


目录号

RNT004

  • 产品描述
  • 产品组分
  • 文件资源
  • 营销中心
  • 注意事项
  • FAQ
  • 文献追踪
  • Shelf Life: 12 months

    Description:

    Poly(A)尾酶检测试剂盒用于在使用高产 T7 ARCA (m)RNA 合成试剂盒(#RNT-102、#RNT-103)体外转录生成的 (m)RNA 转录本的 3' 端添加聚(A)尾。粗体外转录反应混合物(约 10-30 μg RNA)可直接用作模板。

    在真核细胞的转染、微注射或体外翻译实验中,聚腺苷酸化(m)RNA 的稳定性更高,因此翻译效率也更高。该反应由 Poly(A) 聚合酶催化,将 AMP 转移到(m)RNA 分子的 3'- 羟基末端。该反应与模板无关,需要 ATP 作为底物和 Mg2+ 或 Mn2+ 作为辅助因子。

    连接的聚(A)尾的平均长度不仅取决于 RNA 序列、孵育时间和酶浓度,还取决于聚(A)聚合酶的类型。通过聚(A)尾酶测试套件可以直接比较大肠杆菌和酵母聚(A)聚合酶,从而为特定应用找到最合适的酶。
     

    The kit contains sufficient reagents for

    • 25 reactions, 100 μl each with 20 units E. coli Poly(A) polymerase/reaction
    • 50 reactions, 100 μl each with 600 units Yeast Poly(A) polymerase/reaction

    Content:

    E. coli Poly(A) Polymerase
    1x 100 μl (5 units/μl)
    25 mM Tris-HCl, 500 mM NaCl, 1 mM MgCl2, 0.1 mM DTT, 0.1 mM EDTA, 50% Glycerol (v/v), pH 8.0

    E. coli Poly(A) Polymerase Reaction Buffer
    1x 1 ml (10x)
    500 mM Tris-HCl (pH 8.0), 2.5 mM NaCl, 100 mM MgCl2

    Yeast Poly(A) Polymerase
    1x 50 μl (600 units/μl)
    20 mM Tris-HCl (pH 8.0), 50 mM KCl, 0.5 mM DTT, 50% Glycerol (v/v)

    Yeast Poly(A) Polymerase Reaction Buffer
    1x 1.2 ml (5x)
    100 mM Tris-HCl (pH 7.0), 3 mM MnCl2, 0.1 mM EDTA, 1 mM DTT, 0.5 mg/ml acetylated BSA, 50% glycerol (v/v)

    ATP - Solution
    1x 100 μl (100 mM)

    PCR-grade water
    5x 1.2 ml

    To be provided by user
    RNA template (e.g. in vitro transcription reaction mix
    RNA purification tools
    RNAse-free DNAse I

    1. Prevention of RNAse contamination

    Although a potent RNase Inhibitor is included in most in vitro transcription reactions, creating a RNAse-free work environment and maintaining RNAse-free solutions is critical for performing successful polyadenylation reactions. We therefore recommend

    • to perform all reactions in sterile, RNAse-free tubes using sterile pipette tips.
    • to wear gloves when handling samples containing RNA.
    • to keep all components tightly sealed both during storage and reaction procedure.

    2. Poly(A) Tailing with E. coli Poly(A) Polymerase

    The standard protocol typically generates poly(A) tails > 100 nt using 20 μl crude DNAse I-treated in vitro transcription reaction mix (approx. 10 - 30 μg, e.g. #RNT-102 or #RNT-103), however individual optimization of enzyme concentration and incubation time might be required. Please note: Do not stop DNAse I reaction with EDTA since EDTA interferes with the subsequent polyadenylation reaction.

    ComponentVolumeFinal conc.
    IVT reaction mix19 μl 
    PCR-grade waterX μl 
    E. coli Poly(A) Polymerase Reaction Buffer (10x)10 μl1x
    ATP (100 mM)1 μl1 mM
    E. coli Poly(A) Polymerase (5 units/μl)4 μl20 units
    Total volume100 μl 
    • Take 20 μl crude DNAse I-treated in vitro transcription reaction mix as template
    • Safe 1 μl for poly(A) tailing efficiency analysis by agarose gel electrophoresis (negative control)
    • Add PCR-grade water, E. coli Poly(A) Polymerase Reaction Buffer and ATP, voretex and spin-down briefly.
    • Add E. coli Poly(A) Polymerase, voretex and spin-down briefly.
    • Incubate for 60 min at 37°C (e.g. PCR cycler).
    • Stop reaction by a) immediate freezing at -20°C or -70°C or b) immediate purification e.g. spin column-based or c) addition of EDTA to a final concentration > 11 mM.

    3. Poly(A) Tailing with Yeast Poly(A) Polymerase

    The standard protocol typically generates poly(A) tails > 100 nt using 20 μl crude DNAse I-treated in vitro transcription reaction mix (approx. 10 - 30 μg, e.g. #RNT-102 or #RNT-103), however individual optimization of enzyme concentration and incubation time might be required. Please note: Do not stop DNAse I reaction with EDTA since EDTA interferes with the subsequent polyadenylation reaction.

    ComponentVolumeFinal conc.
    IVT reaction mix19 μl 
    PCR-grade waterX μl 
    Yeast Poly(A) Polymerase Reaction Buffer (5x)20 μl1x
    ATP (100 mM)1 μl1 mM
    Yeast Poly(A) Polymerase (600 units/μl)1 μl600 units
    Total volume100 μl 
    • Take 20 μl crude DNAse I-treated in vitro transcription reaction mix as template
    • Safe 1 μl for poly(A) tailing efficiency analysis by agarose gel electrophoresis (negative control)
    • Add PCR-grade water, Yeast Poly(A) Polymerase Reaction Buffer and ATP, voretex and spin-down briefly.
    • Add Yeast Poly(A) Polymerase, voretex and spin-down briefly.
    • Incubate for 30 min at 37°C (e.g. PCR cycler).
    • Stop reaction by a) immediate freezing at -20°C or -70°C or b) immediate purification e.g. spin column-based or c) addition of EDTA to a final concentration > 11 mM.

    Please note: Reagents for the following steps are not provided within this kit.

    Analysis of poly(A) tailing efficiency by agarose gel electrophoresis
    Poly(A) tailed (m)RNA is longer than its untailed counterpart. This poly(A) tail-depending size shift can be visualized e.g. by agarose gel electrophoresis

    • Pour a native TAE or denaturing formaldehyd agarose gel including ethidium bromide of the appropriate percentage (1% for RNA transcripts > 500 nt, 2% for RNA transcripts < 500 nt – 100 nt)
    • Add a formamide-containing loading buffer to all RNA probes (before tailing (negative control) and after tailing reaction). The loading buffer must include > 20 mM EDTA to prevent heat degradation caused by divalent cations such as MgCl2 (e.g. 2x RNA Loading Dye, ThermoScientific).
    • Incubate for 10 min at 70°C
    • Load samples and run TAE agarose gel at approx. 5V/cm gel.
    • Analyze poly(A) tailing efficiency by UV excitation.

    (m)RNA purification
    Purification of (m)RNA is required prior to some downstream applications e.g. spectroscopic quantitation or transfection. Spin column purification will remove proteins, salts and unincorporated nucleotides. Please follow the manufacturer instructions and ensure that the columns match with product size and possess a sufficient binding capacity ≥ 50 μg or ≥ 500 μg (e.g. RNA Clean & ConcentratorTM columns (Zymo Research) or Monarch® RNA Cleanup kit (NEB)).

    (m)RNA quantitation
    (m)RNA concentration can be determined by absorbance measurement at 260 nm (A260) according to the Law-of-Lambert-Beer (A260 = 1 correspond to 40 μg/ml ssRNA).

  • 产品组分

    内容

    型号

    规格

    储存温度

    Poly(A)尾酶检测试剂盒

    RNT00475次(100ul)-20°C

    操作手册

    11

    室温

  • 文件资源

    文件下载

    文件内容

    资源说明

    RNT004-Poly(A)尾酶检测试剂盒

    操作手册

    RNT004-Poly(A)尾酶检测试剂盒相关单页

    宣传单页

     

  • 营销中心1

  • 注意事项

    保存建议厂家推荐蓝冰运输。当您收到产品后,按照说明书建议保存于-20°C。

     

  • FAQ

     

在线留言

如果您对我们的产品感兴趣,请留下您的信息,我们将尽快与您联系,谢谢!

图片名称

艾维缔官网

图片名称
图片名称

艾德官网

图片名称
图片名称

B站IVDSHOW

图片名称
图片名称

抖音军哥聊表观

图片名称
图片名称

视频号艾维缔

图片名称
图片名称

小红书艾维缔

图片名称
图片名称

快手表观盒子

图片名称
图片名称

表观遗传学

图片名称

联系我们

Tel:+86-0313-5935521|18911529660

ADD:张家口市怀来县东花园镇哈工大研究院T8幢7层

邮箱:1951545998@qq.com

留言咨询

如果您对我们的产品和服务感兴趣,请留下您的信息。

立即咨询 →

IVDSHOW

订阅我们,以便及时了解产品更新和特惠活动

%{tishi_zhanwei}%
售后反馈 →

免责申明:本网站销售的所有产品均不得用于人类或动物之临床诊断或治疗,仅可用于工业或者科研等非医疗目的。(获得国家相关部门批准的产品除外) 

版权所有:艾维缔科技怀来有限公司 

营业执照