搜索历史清除全部记录
最多显示8条历史搜索记录噢~
全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

+
  • ivdshowr.png

高产T7 P&L RNA合成试剂盒

高产T7 P&L RNA合成试剂盒,HighYield T7 P&L RNA Synthesis Kit,设计用于使用改良的 T7 RNA 聚合酶通过体外转录产生大量 RNA。更多视频请关注视频号【艾维缔】。哔哩哔哩【IVDSHOW】。抖音【军哥聊表观】。


关键词

高产T7 P&L RNA合成试剂盒


所属分类


目录号

RNT201

  • 产品描述
  • 产品组分
  • 文件资源
  • 营销中心
  • 注意事项
  • FAQ
  • 文献追踪
  • Shelf Life: 12 months after date of delivery

    Description:高产T7 P&L RNA合成试剂盒设计用于使用改良的 T7 RNA 聚合酶通过体外转录产生大量 RNA。脯氨酸 266 已被亮氨酸(P266L)取代,而亮氨酸与中止转录的减少有关[1]。
    减少中止转录[1]。
    提高了从 A 启动子 phi2.5 合成的转录本的 5'同质性[2]。
    提高了 GTP 类似物的 5' 结合效率[3]。
    得到的 RNA 随后可用于多种用途,如显微注射、转染或体外翻译实验、结构/功能研究或原位杂交和 Northern 印迹实验探针。
    一个试剂盒中的试剂足够进行 50 个反应,每个反应 20 μl(每个 NTP 7.5 mM)。一个 20 μl 的反应在孵育 30 分钟后可产生约 140-160 μg RNA(1 μg T7 对照模板,1.4 kb RNA 转录本)。不过,产量可能会因模板(启动子设计、序列长度、二级结构形成)的不同而有所变化。

    Content:

    HighYield T7 P&L RNA Polymerase Mix
    3x 40 μl incl. RNase inhibitor and 50 % glycerol (v/v)

    HighYield T7 Reaction Buffer
    1x 200 μl (10x), HEPES-based

    ATP - Solution
    1x 100 μl (100 mM)

    GTP - Solution
    1x 100 μl (100 mM)

    CTP - Solution
    1x 100 μl (100 mM)

    UTP - Solution
    1x 100 μl (100 mM)

    T7 G-initiating control template (1.4 kbp)
    1x 10 μl (200 ng/μl), 1.4 kbp PCR fragment plus T7 class III phi6.5 promotor resulting in ~1400 nt RNA transcript

    PCR-grade water
    1x 1.2 ml

    DTT
    1x 100 μl (100 mM)

    To be provided by user
    T7 Promotor-containing DNA template
    RNA purification tools, RNAse-free DNAse I

    Important Notes (Read before starting)

    Prevention of RNAse contamination
    Although a potent RNase Inhibitor is included, creating a RNAse-free work environment and maintaining RNAse-free solutions is critical for performing successful in vitro transcription reactions. We therefore recommend

    • to perform all reactions in sterile, RNAse-free tubes using sterile pipette tips.
    • to wear gloves when handling samples containing RNA.
    • to keep all components tightly sealed both during storage and reaction procedure.

    Template requirements

    • Template type: Linearized plasmid DNA or PCR products containing a double-stranded T7 class II phi2.5 or class III phi6.5 promotor region upstream of the target sequence.

    Minimum T7 promotor sequences:

    T7 class III phi6.5 promotor
    5'-TAATACGACTCACTATAGNN…-3’
    Bold: First base incorporated into RNA, NN: ideally CG

    or

    T7 class II phi2.5 promotor
    5'-TAATACGACTCACTATTANN…-3’
    5'-TAATACGACTCACTATAANN…-3’
    Bold: First base incorporated into RNA, NN: ideally GG

    • Template quality: DNA template quality directly influences yield and quality of transcription reaction. Linearized plasmid DNA needs to be fully digested and to be free of contaminating RNase, protein and salts. We recommend selecting restriction enzymes that generate blunt ends or 5´-overhangs and purification by phenol/chloro¬form extraction. A PCR mixture can be used directly however, better yields will usually be obtained with purified PCR products (e.g. via silica-membrane based purification columns).
    • mRNA production: For the production of functional mRNA please ensure that the DNA template encodes the required structural features e.g. 3’-UTR, 5’-UTR, correctly orientated target sequence and poly A-tail. Alternatively, polyA-tailing can post-transcriptionally be performed with Poly A polymerase.

    In vitro Transcription protocol
    The protocol is optimized for 1 μg DNA template (refer to "Important Notes" regarding template requirements).

    • Place HighYield T7 P&L RNA Polymerase Mix on ice.
    • Thaw all remaining components at room temperature (RT), mix by voretexing and spin down briefly.
    • Assemble all components at RT to a nuclease-free microtube (sterile pipette tips) in the following order:
    • Mix PCR-grade water, HighYield T7 Reaction Buffer and DTT by voretexing and spin down briefly.
    • Add nucleotide solutions and template DNA, vortex and spin down briefly.
    • Add HighYield T7 P&L RNA Polymerase Mix vortex and spin down briefly.
    • Incubate for 2h at 37°C in the dark (e.g. PCR cycler). Depending on the RNA sequence individual optimization may increase product yield (0.5h–4h at 37°C).
    ComponentVolumeFinal conc.
    PCR-grade waterX μl 
    HighYield T7 Reaction Buffer (10x)2 μl1x
    DTT (100 mM)2 μl10 mM
    ATP (100 mM)1.5 μl7.5 mM
    UTP (100 mM)1.5 μl7.5 mM
    CTP (100 mM)1.5 μl7.5 mM
    GTP (100 mM)1.5 μl7.5 mM
    Template DNAX μl1 μg
    HighYield T7 P&L RNA Polymerase Mix2 μl 
    Total volume20 μl 

    Please note: Reagents for the following steps are not provided within this kit.

    DNA template removal
    Depending on the down-stream application, removal of template DNA might be required. We recommend a salt-resistant, high efficiency DNAase such as Turbo™DNAse (ThermoFisher). Follow the manufacturer instructions.


    Removal of 5'-triphosphate groups
    5'-ends of in vitro phosphorylated RNAs carry a triphosphate group that is known to trigger RIG-1 mediated innate immune response in mammalian cells[4,5]. Removal with phosphatases (e.g. CIP) before final purification is therefore recommended for RNA probes intended for transfection experiments. Please refer to the following references for more detailed information: [4],[5].

    RNA purification
    Purification of RNA is required for certain applications such as RNA concentration mesurement. Spin column purification will remove proteins, salts and unincorporated nucleotides. Please follow the manufacturer instructions and ensure that the columns match with product size and possess a sufficient binding capacity (e.g. RNA Clean & Concentrator™ columns (Zymo Research) or Monarch® RNA Cleanup kit (NEB)). Other RNA purification methods such as LiCl precipitation may work but have not been tested.

    RNA quantitation
    RNA concentration can be determined by absorbance measurement at 260 nm (A260) according to the Law-of-Lambert-Beer (A260 = 1 corresponds to 40 μg/ml ssRNA).

  • 产品组分

    内容

    型号

    规格

    储存温度

    高产T7 P&L RNA合成试剂盒

    RNT201-0150次x20ul-20°C

    高产T7 P&L RNA合成试剂盒

    RNT201-02200次x20ul-20°C

    操作手册

    11

    常温

  • 文件资源

    文件下载

    文件内容

    资源说明

    RNT201-高产T7 P&L RNA合成试剂盒

    操作手册

    RNT201-高产T7 P&L RNA合成试剂盒相关单页

    宣传单页

     

  • 营销中心1

  • 注意事项

    保存建议 厂家推荐蓝冰运输。当您收到产品后,按照说明书建议保存于-20°C。

     

  • FAQ

     

  • [1] Guillerez et al. (2005) A mutation in T7 RNA polymerase that facilitates promoter clearance. Natl. Acad. Sci. U.S.A102:5958.
    [2] Salvail-Lacoste et al. (2018) Affinity purification of T7 RNA transcripts with homogeneous ends using ARiBo and CRISPR tags. RNA19:1003.
    [3] Lyon et al. (2018) A mT7 RNA Polymerase Mutant Enhances the Yield of 5'-Thienoguanosine-Initiated RNAs. ChemBioChem19:142.
    [4] Wienert et al. (2018) In vitro transcribed guide RNAs trigger an innate immune response via RIG-I pathway. PLoS Biol. 16 (7) :e2005840.
    [5] Kim et al. (2018) CRISPR RNAs trigger innate immune responses in human cells. Genome Res. 28 (3):367.

在线留言

如果您对我们的产品感兴趣,请留下您的信息,我们将尽快与您联系,谢谢!

图片名称

艾维缔官网

图片名称
图片名称

艾德官网

图片名称
图片名称

B站IVDSHOW

图片名称
图片名称

抖音军哥聊表观

图片名称
图片名称

视频号艾维缔

图片名称
图片名称

小红书艾维缔

图片名称
图片名称

快手表观盒子

图片名称
图片名称

表观遗传学

图片名称

联系我们

Tel:+86-0313-5935521|18911529660

ADD:张家口市怀来县东花园镇哈工大研究院T8幢7层

邮箱:1951545998@qq.com

留言咨询

如果您对我们的产品和服务感兴趣,请留下您的信息。

立即咨询 →

IVDSHOW

订阅我们,以便及时了解产品更新和特惠活动

%{tishi_zhanwei}%
售后反馈 →

免责申明:本网站销售的所有产品均不得用于人类或动物之临床诊断或治疗,仅可用于工业或者科研等非医疗目的。(获得国家相关部门批准的产品除外) 

版权所有:艾维缔科技怀来有限公司 

营业执照