- 产品描述
- 产品组分
- 文件资源
- 营销中心
- 注意事项
- FAQ
- 文献追踪
-
For research use only.
Description:
HighFidelity AZDye488 PCR Labeling Kit is designed to produce randomly AZDye488-modified DNA probes by PCR. Such probes are ideally suited for Fluorescence in situ hybridization (FISH) and Northern Blot experiments. PCR-based labeling is superior to random-primed labeling with Klenow fragment if template amounts are limited or amplification of a specific DNA fragments is required. Amplification of probes up to 4kbp is feasible.dUTP-XX-AZDye488 is efficiently incorporated into DNA as substitute for its natural counterpart dTTP using an optimized reaction buffer and a High Fidelity Polymerase blend consisting of Taq polymerase and a proofreading enzyme. 50 % dUTP-XX-AZDye488 substitution typically results in an optimal balance between reaction and labeling efficiency. Individual optimization of dUTP-XX-AZDye488/dTTP ratio however, can easily be achieved with the single nucleotide format.
The kit contains sufficient reagents for 10 labeling reactions (S-Pack) or 50 labeling reactions (L-Pack) of 20 μl each (50% dUTP-XX-AZDye488 substitution, 100 μM dATP/dGTP/dCTP, 50 μM dTTP, 50 μM dUTP-XX-AZDye488).Shipping: shipped on gel packs
Storage Conditions: store at -20 °C
avoid freeze/thaw cycles, store darkShelf Life: 12 months
Spectroscopic Properties: λexc 494 nm, λem 515 nm, ε 73.0 L mmol-1 cm-1 (Tris-HCl pH 7.5)
Content:
High Fidelity Polymerase
in storage buffer with 50% glycerol (v/v)
#APP-101-AZ488-S: 1x 40 μl (100 units, 2.5 units/μl)
#APP-101-AZ488-L: 2x 40 μl (2x 100 units, 2.5 units/μl)High Fidelity Labeling Buffer
1x 500 μl (10x)dATP - Solution
1x 20 μl (100 mM)dGTP - Solution
1x 20 μl (100 mM)dCTP - Solution
1x 20 μl (100 mM)dTTP - Solution
1x 20 μl (100 mM)dUTP-XX-AZDye488
#APP-101-AZ488-S: 1x 10 μl (1 mM)
#APP-101-AZ488-L: 5x 10 μl (1 mM)Lambda DNA
1x 20 μl (100 ng/μl)500 bp forward primer
1x 20 μl (10 μM)500 bp reverse primer
1x 20 μl (10 μM)PCR-grade water
1x 1.2 mlTo be provided by user
DNA template
Primer
DNA purification tools (optional)1. Preparation of working solutions
1.1 Preparation of 1 mM dATP/dCTP/dGTP working solution
- Thaw 100 mM dATP, 100 mM dCTP and 100 mM dGTP solutions on ice, voretex and spin-down briefly.
- Prepare a 1:100 dilution with PCR-grade water to achieve a final concentration of 1 mM (e.g. 2 μl 100 mM dATP + 2 μl 100 mM dCTP + 2 μl 100 mM dGTP + 194 μl PCR-grade water).
- 1 mM ATP/CTP/GTP working solution can be stored at -20°C. Prepare aliquots to avoid freeze/thaw cycles.
1.2 Preparation of 1 mM dTTP working solution
- Thaw 100 mM dTTP solution on ice, voretex and spin-down briefly.
- Prepare a 1:100 dilution with PCR-grade water to achieve a final concentration of 1 mM (e.g. 2 μl 100 mM dTTP + 198 μl PCR-grade water).
- 1 mM dTTP working solution can be stored at -20 °C. Prepare aliquots to avoid freeze/thaw cycles.
3. Standard PCR Labeling protocol
The standard protocol is set-up for labeling of a 500 bp DNA fragment. An optimal balance between reaction and labeling efficiency is typically achieved with 50% dUTP-XX-AZDye488 substitution following the standard protocol below however, individual optimization might improve results for individual applications.
- Assemble the PCR on ice in the order stated below (DNAse-free reaction tube).
- Voretex and spin-down briefly.
- Perform assay set-up and reaction under low-light conditions.
Component Volume Final concenctration PCR-grade water X μl High Fidelity Labeling Buffer (10x) 2 μl 1x 1 mM dATP/dCTP/ dGTP working solution (s. 1.1) 2 μl 100 μM 1 mM dTTP working solution (s. 1.2) 1 μl 50 μM 1 mM dUTP-XX-AZDye488 1 μl 50 μM forward primer
(10 μM)X μl 0.1 - 1 μM (e.g. 0.3 μM 500 bp forward primer) reverse primer
(10 μM)X μl 0.1 - 1 μM (e.g. 0.3 μM 500 bp reverse primer) template DNA X μl 1 - 10 ng genomic DNA (e.g. 1 ng Lambda DNA) High Fidelity Polymerase (2.5 units/μl) 1 μl 2.5 units Total volume 20 μl Recommended cycling conditions
Cycle step Temperature Time Cycles Initial
denaturation95°C 2 min 1x Denaturation
Annealing1)
Elongation2)95°C
58°C
68°C20 sec
30 sec
60 sec30x Final
Elongation68°C 2 min 1x 1)The annealing temperature depends on the melting temperature of primers used.
2)The elongation time depends on the length of fragments to be amplified. A time of 2 min/kbp is recommended. Elongation at 72°C works as well.For optimal amplification results and high incorporation rates an individual optimization of the recommended PCR assay and cycling conditions may be necessary for each new primer-template pair.
4. Probe purification:
Probe purification is not required for most hybridization experiments. If a downstream application requires purification (e.g. concentration determination by absorbance measurement) we recommend silica-membrane or gel filtration-based purification.
-
产品组分
内容
型号
规格 储存温度
高保真AZDye488 PCR标记试剂盒
APP101AZ488-01 10次x20μL -20°C 高保真AZDye488 PCR标记试剂盒
APP101AZ488-02 50次x20μL -20°C 操作手册
1 1 常温室温
-
注意事项
保存建议 厂家推荐蓝冰运输。当您收到产品后,按照说明书建议保存于-20°C。 -
FAQ
-
Inheritance of H3K9 methylation regulates genome architecture in Drosophila early embryos.
Nazerke Atinbayeva, Iris Valent, ..., Nicola Iovino
The EMBO Journal | 2024 Jul 02 | 38831123
An improved in situ hybridization method for the detection of fish pathogens.
U M McCarthy, K L Urquhart, I R Bricknell
Journal of fish diseases | 2008 Dec 18 | 18786029
猜你喜欢
在线留言
如果您对我们的产品感兴趣,请留下您的信息,我们将尽快与您联系,谢谢!
艾维缔官网
艾德官网
B站IVDSHOW
抖音军哥聊表观
视频号艾维缔
小红书艾维缔
快手表观盒子
表观遗传学
联系我们

