- 产品描述
- 产品组分
- 文件资源
- 营销中心
- 注意事项
- FAQ
- 文献追踪
-
For research use only.
Description:
HighFidelity GREEN PCR Labeling Testkit is designed to produce randomly Fluorescein-, ATTO488- and AZDye488-modified DNA probes by PCR to find the optimal label for the green emission wavelength range. Such probes are ideally suited for Fluorescence in situ hybridization (FISH) and Northern Blot experiments. PCR-based labeling is superior to random-primed labeling with Klenow fragment if template amounts are limited or amplification of a specific DNA fragments is required. Amplification of probes up to 4kbp is feasible.All labeled-dUTPs are efficiently incorporated into DNA as substitute for its natural counterpart dTTP using an optimized reaction buffer and a High Fidelity Polymerase blend consisting of Taq polymerase and a proofreading enzyme. 50 % labeled-dUTP substitution typically results in an optimal balance between reaction and labeling efficiency. Individual optimization of labeled-dUTP/dTTP ratio however, can easily be achieved with the single nucleotide format.
Shipping: shipped on gel packs
Storage Conditions: store at -20 °C
avoid freeze/thaw cycles, store darkShelf Life: 12 months
Spectroscopic Properties: Fluorescein: λexc 492 nm, λem 517 nm, ε 83.0 L mmol-1 cm-1 (Tris-HCl pH 7.5) ATTO488: λexc 500 nm, λem 520 nm, ε 90.0 L mmol-1 cm-1 (Tris-HCl pH 7.5) AZDye488: λexc 494 nm, λem 515 nm, ε 73.0 L mmol-1 cm-1 (Tris-HCl pH 7.5)
Content:
High Fidelity Polymerase
in storage buffer with 50% glycerol (v/v)
1x 40 μl (100 units, 2.5 units/μl)High Fidelity Labeling Buffer
1x 500 μl (10x)dATP - Solution
1x 20 μl (100 mM)dGTP - Solution
1x 20 μl (100 mM)dCTP - Solution
1x 20 μl (100 mM)dTTP - Solution
1x 20 μl (100 mM)Fluorescein-12-dUTP
1x 10 μl (1 mM)dUTP-XX-ATTO-488
1x 10 μl (1 mM)dUTP-XX-AZDye488
1x 10 μl (1 mM)Lambda DNA
1x 20 μl (100 ng/μl)500 bp forward primer
1x 20 μl (10 μM)500 bp reverse primer
1x 20 μl (10 μM)PCR-grade water
1x 1.2 mlTo be provided by user
DNA template
Primer
DNA purification tools (optional)1. Preparation of working solutions
1.1 Preparation of 1 mM dATP/dCTP/dGTP working solution
- Thaw 100 mM dATP, 100 mM dCTP and 100 mM dGTP solutions on ice, voretex and spin-down briefly.
- Prepare a 1:100 dilution with PCR-grade water to achieve a final concentration of 1 mM (e.g. 2 μl 100 mM dATP + 2 μl 100 mM dCTP + 2 μl 100 mM dGTP + 194 μl PCR-grade water).
- 1 mM ATP/CTP/GTP working solution can be stored at -20°C. Prepare aliquots to avoid freeze/thaw cycles.
1.2 Preparation of 1 mM dTTP working solution
- Thaw 100 mM dTTP solution on ice, voretex and spin-down briefly.
- Prepare a 1:100 dilution with PCR-grade water to achieve a final concentration of 1 mM (e.g. 2 μl 100 mM dTTP + 198 μl PCR-grade water).
- 1 mM dTTP working solution can be stored at -20 °C. Prepare aliquots to avoid freeze/thaw cycles.
3. Standard PCR Labeling protocol
The standard protocol is set-up for labeling of a 500 bp DNA fragment. An optimal balance between reaction and labeling efficiency is typically achieved with 50% labeled-dUTP substitution following the standard protocol below however, individual optimization might improve results for individual applications.
- Assemble the PCR on ice in the order stated below (DNAse-free reaction tube).
- Voretex and spin-down briefly.
- Perform assay set-up and reaction under low-light conditions.
Component Volume Final concenctration PCR-grade water X μl High Fidelity Labeling Buffer (10x) 2 μl 1x 1 mM dATP/dCTP/ dGTP working solution (s. 1.1) 2 μl 100 μM 1 mM dTTP working solution (s. 1.2) 1 μl 50 μM 1 mM labeled-dUTP 1 μl 50 μM forward primer
(10 μM)X μl 0.1 - 1 μM (e.g. 0.3 μM 500 bp forward primer) reverse primer
(10 μM)X μl 0.1 - 1 μM (e.g. 0.3 μM 500 bp reverse primer) template DNA X μl 1 - 10 ng genomic DNA (e.g. 1 ng Lambda DNA) High Fidelity Polymerase (2.5 units/μl) 1 μl 2.5 units Total volume 20 μl Recommended cycling conditions
Cycle step Temperature Time Cycles Initial
denaturation95°C 2 min 1x Denaturation
Annealing1)
Elongation2)95°C
58°C
68°C20 sec
30 sec
60 sec30x Final
Elongation68°C 2 min 1x 1)The annealing temperature depends on the melting temperature of primers used.
2)The elongation time depends on the length of fragments to be amplified. A time of 2 min/kbp is recommended. Elongation at 72°C works as well.For optimal amplification results and high incorporation rates an individual optimization of the recommended PCR assay and cycling conditions may be necessary for each new primer-template pair.
4. Probe purification:
Probe purification is not required for most hybridization experiments. If a downstream application requires purification (e.g. concentration determination by absorbance measurement) we recommend silica-membrane or gel filtration-based purification.
-
产品组分
内容
型号
规格 储存温度
高保真绿PCR标记检测试剂盒
APP101GREEN-01 10次x20μL -20°C 高保真绿PCR标记检测试剂盒
APP101GREEN-02 50次x20μL -20°C 操作手册
1 1 常温室温
-
注意事项
保存建议 厂家推荐蓝冰运输。当您收到产品后,按照说明书建议保存于-20°C。 -
FAQ
猜你喜欢
在线留言
如果您对我们的产品感兴趣,请留下您的信息,我们将尽快与您联系,谢谢!
艾维缔官网
艾德官网
B站IVDSHOW
抖音军哥聊表观
视频号艾维缔
小红书艾维缔
快手表观盒子
表观遗传学
联系我们

