搜索历史清除全部记录
最多显示8条历史搜索记录噢~
全部
  • 全部
  • 产品管理
  • 新闻资讯
  • 介绍内容
  • 企业网点
  • 常见问题
  • 企业视频
  • 企业图册

+
  • PCR211-1.jpg

热启动聚合酶试剂盒(Ab+)

热启动聚合酶试剂盒(Ab+),Hot Start Polymerase Ab+ Kit, 抗体封闭型热激活DNA聚合酶,高特异性,水生栖热菌,重组型,大肠杆菌。更多视频请关注视频号【艾维缔】。哔哩哔哩【IVDSHOW】。抖音【军哥聊表观】。


关键词

热启动聚合酶试剂盒(Ab+)


所属分类


目录号

PCR213

  • 产品描述
  • 产品组分
  • 文件资源
  • 营销中心
  • 注意事项
  • FAQ
  • 文献追踪
  • For research use only.
    Please centrifuge briefly before opening (volume ≤2 ml).

    Description:
    Hot Start Polymerase Ab+ provides improved specificity and sensitivity when amplifying low-copy-number targets in complex backgrounds or when prolonged room-temperature set up is required. The polymerase activity is blocked at ambient temperature and switched on automatically at the initial denaturation. The thermal activation prevents the extension of nonspecifically annealed primers and primer-dimer formation at low temperatures during PCR setup. The polymerase is recommended for routine PCR applications (up to 4 kb fragment length), high throughput PCR or genotyping.
    The Crystal Buffer system guarantees robust and reliable amplification results in almost all PCR applications. The buffer contains a well-balanced ratio of potassium-, ammonium- and magnesium-ions to ensure high specificity and minimal by-product formation without the need of additional optimization steps.
    Ruby Buffer additionally contains gel loading buffer and an inherent red dye allowing the direct loading of the PCR product into the gel. The red dye allows an easy visual control during PCR set-up and in combination with the density reagent the direct loading of the reaction product into the gel.
    The enzyme replicates DNA at 72 °C. It catalyzes the polymerization of nucleotides into duplex DNA in 5'→3' direction in the presence of magnesium. It also possesses a 5'→3' polymerization-dependent exonuclease replacement activity but lacks a 3'→5' exonuclease (proof-reading) activity.

    Activation step
    Hot Start Polymerase Ab+ requires no prolonged heating or denaturing step. The polymerase inhibiting antibody is released within 2 min at >92°C at the initial denaturation step.

    Unit Definition: One unit is defined as the amount of the enzyme required to catalyze the incorporation of 10 nmoles of dNTP's into an acid-insoluble form in 30 minutes at 70 °C using hering sperm DNA as substrate.

    Shipping: shipped on gel packs

    Storage Conditions: store at -20 °C
    avoid freeze/thaw cycles

    Shelf Life: 12 months

    Form: liquid

    Concentration: 5 units/μl

    Content:
    Hot Stort Polymerase Ab+ (red cap)
    5 units/μl antibody-blocked hot start polymerase in 20 mM Tris-HCl, 100 mM KCl, 0.1 mM EDTA, 1 mM DTT, stabilizers, 50 % (v/v) Glycerol, pH 9.0 (25°C)

    Ruby Buffer (black cap)
    10 x conc. complete PCR buffer containing 200 mM Tris-HCl, KCl, (NH4)2SO4 and 20 mM MgCl2, red tracking dye and density reagent for gel loading

    Crystal Buffer (green cap)
    10 x conc. complete PCR buffer containing 100 mM Tris-HCl, KCl, (NH4)2SO4 and 15 mM MgCl2

    component PCR213-01 PCR213-02 PCR213-03
    Hot Start Polymerase Ab+ 200 units / 40 μl 5 x 200 units / 5 x 40 μl 5000 units / 1 ml
    Ruby Buffer 1.2 ml 5 x 1.2 ml 25 ml
    Crystal
    Buffer
    1.2 ml 5 x 1.2 ml 25 ml

    Assay Set-Up:
    Before starting, vortex all components thoroughly to ensure homogeneity.
    Prepare a premix for the number of assays you need according to the following protocol:

    comp. cap stock conc. final conc. 1 assay @20 μl 1 assay @ 50 μl
    PCR-grade Water white     fill up to 10 μl fill up to 30 μl
    Ruby Buffer or Crystal Buffer black or green 10x 1x 2 μl 5 μl
    dNTP Mix / 10 mM #NU-1006 white 10 mM 200 μM 0.4 μl 1 μl
    Hot Start Polymerase Ab+ red 5 units/μl 0.025 units/μl 0.1 μl 0.25 μl
    primer mix or each primer   10 μM each primer 200 - 400 nM each primer 0.4-0.8 μl 1 - 2 μl
    template
    /sample DNA
          10 μl < 10 ng DNA 20 μl < 20 ng DNA

    Select PCR tubes, stipes or plates as recommended for your cycler model.
    Aliquot premix into each well and add template DNA (or PCR-grade Water for negative controls).

    Cycling Conditions:

    Spin down the tubes/plate briefly to remove bubbles and place them into the cycler.

    initial
    denaturation
    95 °C 2 min 1x
    denaturation
    annealing1)
    elongation2)
    95 °C
    50 - 68 °C
    72 °C
    10 - 20 sec
    10 - 20 sec
    20 sec - 4 min

    25 - 35x

    1)The annealing temperature depends on the melting temperature of the primers used.
    2)The elongation time depends on the length of the fragments to be amplified. A time of 1 min/kb is recommended.

    Gel Loading and Down-Stream Applications:

    Ruby Buffer (#PCR272) includes a density reagent + tracking dye and allows the direct loading of the PCR products into a electrophoresis gel. For DNA detection / fluorescent DNA staining we recommend to use new generations dyes (e.g. GREEN DNA Stain, #PCR-273) instead of the classical but highly mutagenic ethidium bromide.
    Crystal Buffer(#PCR271) is recommended for down-stream applications such as DNA sequencing, ligation, restriction digestion or where an analysis of the PCR product by absorbance or fluorescence excitation is required. For gel electrophoresis add gel loading buffer and fluorescent DNA stain (e.g. Gel Loading Buffer with DNA Stain, #PCR274 - #PCR276) before loading the PCR into the gel. Using pre-stained gels or post-run staining protocols is also possible.

    Additional Buffer Systems:
    Labeling Buffer (#PCR263) is recommended for DNA labeling or mutagenesis applications. The buffer is specially optimized for incorporation of labeled or modified nucleotides into DNA. It gives superior results in a broad range of reaction conditions with most primer-template pairs but amplification may also tend to an increased unspecifity.
    KCl Buffer (#PCR262) is recommended for use in routine PCR reactions. The buffer is optimized for highest specificity but may require additional fine-tuning of assay parameters like MgCl2 concentration and annealing temperature.

    Optimization of MgCl2 concentration:
    A final Mg2+ concentration of 1.5 mM is recommended in combination with Crystal Buffer. However, if an individual Mg2+ optimization is essential add 25 mM MgCl2 stock solution (#PCR266) as shown in the table below.

    final MgCl2 conc. 20 μl final assay volume 50 μl final assay volume
    1.5 mM - -
    2 mM 0.4 μl 1.0 μl
    3 mM 1.2 μl 3.0 μl
    4 mM 2.0 μl 5.0 μl
    5 mM 2.8 μl 7.0 μl
  • 产品组分

    内容

    型号

    规格

    储存温度

    热启动聚合酶试剂盒(Ab+)

    PCR213-01

    200Units

    -20°C

    热启动聚合酶试剂盒(Ab+)

    PCR213-02

    1000Units

    -20°C

    热启动聚合酶试剂盒(Ab+)

    PCR213-03

    5000Units

    -20°C

    操作手册

    1 1

    常温

  • 文件资源

    文件下载 文件内容 资源说明
    PCR213-热启动聚合酶试剂盒(Ab+) 操作手册
    PCR213-热启动聚合酶试剂盒(Ab+)相关单页 宣传单页

     

  • 营销中心1

  • 注意事项

    保存建议 厂家推荐蓝冰运输。当您收到产品后,按照说明书建议保存于-20°C。

     

  • FAQ

     

在线留言

如果您对我们的产品感兴趣,请留下您的信息,我们将尽快与您联系,谢谢!

图片名称

艾维缔官网

图片名称
图片名称

艾德官网

图片名称
图片名称

B站IVDSHOW

图片名称
图片名称

抖音军哥聊表观

图片名称
图片名称

视频号艾维缔

图片名称
图片名称

小红书艾维缔

图片名称
图片名称

快手表观盒子

图片名称
图片名称

表观遗传学

图片名称

联系我们

Tel:+86-0313-5935521|18911529660

ADD:张家口市怀来县东花园镇哈工大研究院T8幢7层

邮箱:1951545998@qq.com

留言咨询

如果您对我们的产品和服务感兴趣,请留下您的信息。

立即咨询 →

IVDSHOW

订阅我们,以便及时了解产品更新和特惠活动

%{tishi_zhanwei}%
售后反馈 →

免责申明:本网站销售的所有产品均不得用于人类或动物之临床诊断或治疗,仅可用于工业或者科研等非医疗目的。(获得国家相关部门批准的产品除外) 

版权所有:艾维缔科技怀来有限公司 

营业执照