搜索历史清除全部记录

最多显示8条历史搜索记录噢~

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

昵称 | 退出

首页

超纯高产T7RNA合成试剂盒

超纯高产T7RNA合成试剂盒，HighYield T7 PURE RNA Synthesis Kit，使用修饰的T7 RNA聚合酶通过体外转录合成RNA，减少双链RNA的形成。更多视频请关注视频号【艾维缔】。哔哩哔哩【IVDSHOW】。抖音【军哥聊表观】。

关键词

超纯高产T7RNA合成试剂盒

所属分类

RNA修饰检测

IVT

目录号

CNRNT501

获取报价

猜你喜欢

产品描述
产品组分
文件资源
营销中心
注意事项
FAQ
文献追踪

For general laboratory use.

Shipping: shipped on gel packs

Storage Conditions: store at -20 °C
avoid freeze/thaw cycles

Shelf Life: 12 months after date of delivery

Description:
HighYield T7 PURE RNA Synthesis Kit is designed to produce large amounts of RNA via in vitro transcription with reduced double-stranded RNA (dsRNA) formation using a modified T7 RNA Polymerase (T7 PURE).

dsRNA is a critical transcriptonal by-product of wildtype T7 RNA known to trigger an innate immune response and reduction of dsRNA levels requires time-consuming multi-step chromatographic purifcation [1-4]

HighYield T7 PURE RNA Synthesis Kit is therefore ideally suited for the preparation of RNA probes were the dsRNA impurity level is critical for the subsequent application (e.g. mRNA preparation for cell culture experiments). It reduces down-stream purification efforts to reduce/remove dsRNA contamination.

One kit contains sufficient reagents for 50 reactions of 20 μl each (7.5 mM each NTP). A 20 μl reaction yields about 100-120 μg RNA after 30 min and 140-160 μg RNA after 2h incubation (1 μg T7 control template, 1.4 kb RNA transcript). Yields may however vary depending on the template (promoter design, sequence length, secondary structure formation).

Content:
HighYield T7 PURE RNA Polymerase Mix
3x 40 μl incl. RNase inhibitor and 50 % glycerol (v/v)

HighYield T7 Reaction Buffer
1x 200 μl (10x), HEPES-based

ATP - Solution
1x 100 μl (100 mM)

GTP - Solution
1x 100 μl (100 mM)

CTP - Solution
1x 100 μl (100 mM)

UTP - Solution
1x 100 μl (100 mM)

T7 G-initiating control template (1.4 kbp)
1x 10 μl (200 ng/μl), 1.4 kbp PCR fragment plus T7 class III phi6.5 promotor resulting in ~1400 nt RNA transcript

T7 A-initiating control template (1.4 kbp)
1x 10 μl (200 ng/μl), 1.4 kbp PCR fragment plus T7 class II phi2.5 promotor (A-initiating) resulting in ~1400 nt RNA transcript

PCR-grade water
1x 1.2 ml

DTT
1x 150 μl (100 mM)

To be provided by user
T7 Promotor-containing DNA template
RNA purification tools, RNAse-free DNAse I

Important Notes (Read before starting)

Prevention of RNAse contamination
Although a potent RNase Inhibitor is included, creating a RNAse-free work environment and maintaining RNAse-free solutions is critical for performing successful in vitro transcription reactions. We therefore recommend

to perform all reactions in sterile, RNAse-free tubes using sterile pipette tips.
to wear gloves when handling samples containing RNA.
to keep all components tightly sealed both during storage and reaction procedure.

Template requirements

Template type: Linearized plasmid DNA or PCR products containing a double-stranded T7 class II phi2.5 or class III phi6.5 promotor region upstream of the target sequence.

Minimum T7 promotor sequences:

T7 class III phi6.5 promotor
5'-TAATACGACTCACTATAGNN…-3’
Bold: First base incorporated into RNA, NN: ideally CG

T7 class II phi2.5 promotor
5'-TAATACGACTCACTATTANN…-3’
5'-TAATACGACTCACTATAANN…-3’
Bold: First base incorporated into RNA, NN: ideally GG

Template quality: DNA template quality directly influences yield and quality of transcription reaction. Linearized plasmid DNA needs to be fully digested and to be free of contaminating RNase, protein and salts. We recommend selecting restriction enzymes that generate blunt ends or 5´-overhangs and purification by phenol/chloro¬form extraction. A PCR mixture can be used directly however, better yields will usually be obtained with purified PCR products (e.g. via silica-membrane based purification columns).
mRNA production: For the production of functional mRNA please ensure that the DNA template encodes the required structural features e.g. 3’-UTR, 5’-UTR, correctly orientated target sequence and poly A-tail. Alternatively, polyA-tailing can post-transcriptionally be performed with Poly A polymerase.

In vitro Transcription protocol
The protocol is optimized for 1 μg DNA template (refer to "Important Notes" regarding template requirements).

Place HighYield T7 PURE RNA Polymerase Mix on ice.
Thaw all remaining components at room temperature (RT), mix by voretexing and spin down briefly.
Assemble all components at RT to a nuclease-free microtube (sterile pipette tips) in the following order:
Mix PCR-grade water, HighYield T7 Reaction Buffer and DTT by voretexing and spin down briefly.
Add nucleotide solutions and template DNA, vortex and spin down briefly.
Add HighYield T7 PURE RNA Polymerase Mix vortex and spin down briefly.
Incubate for 2h at 37°C in the dark (e.g. PCR cycler). Depending on the RNA sequence individual optimization may increase product yield (0.5h–4h at 37°C).

Component	Volume	Final conc.
PCR-grade water	X μl
HighYield T7 Reaction Buffer (10x)	2 μl	1x
DTT (100 mM)	2 μl	10 mM
ATP (100 mM)	1.5 μl	7.5 mM
UTP (100 mM)	1.5 μl	7.5 mM
CTP (100 mM)	1.5 μl	7.5 mM
GTP (100 mM)	1.5 μl	7.5 mM
Template DNA	X μl	1 μg
HighYield T7 PURE RNA Polymerase Mix	2 μl
Total volume	20 μl

Please note: Reagents for the following steps are not provided within this kit.

DNA template removal
Depending on the down-stream application, removal of template DNA might be required. We recommend a salt-resistant, high efficiency DNAase such as Turbo™DNAse (ThermoFisher). Follow the manufacturer instructions.

Removal of 5'-triphosphate groups
5'-ends of in vitro phosphorylated RNAs carry a triphosphate group that is known to trigger RIG-1 mediated innate immune response in mammalian cells^[4,5]. Removal with phosphatases (e.g. CIP) before final purification is therefore recommended for RNA probes intended for transfection experiments. Please refer to the following references for more detailed information: [5],[6].

RNA purification
Purification of RNA is required for certain applications such as RNA concentration mesurement. Spin column purification will remove proteins, salts and unincorporated nucleotides. Please follow the manufacturer instructions and ensure that the columns match with product size and possess a sufficient binding capacity (e.g. RNA Clean & Concentrator™ columns (Zymo Research) or Monarch® RNA Cleanup kit (NEB)). Other RNA purification methods such as LiCl precipitation may work but have not been tested.

RNA quantitation
RNA concentration can be determined by absorbance measurement at 260 nm (A₂₆₀) according to the Law-of-Lambert-Beer (A₂₆₀ = 1 corresponds to 40 μg/ml ssRNA).

产品组分

内容	型号	规格	储存温度
超纯高产T7RNA合成试剂盒	CNRNT501-01	50次x20ul	-20°C
超纯高产T7RNA合成试剂盒	CNRNT501-02	100次x20ul	-20°C
操作手册	1	1	常温

文件资源

营销中心
注意事项

保存建议厂家推荐蓝冰运输。当您收到产品后，按照说明书建议保存于-20°C。
FAQ
[1] Nelson et al. (2020) Impact of mRNA chemistry and manufacturing process on innate immune activation. Sci.Adv. 6:eaaz6893.
[2] Mu et al. (2018) An origin of the immunogenicity of in vitro transcribed RNA. Nucleic Acids Res. 46(10): 5239.
[3] Karikó et al. (2011) Generating the optimal mRNA for therapy: HPLC purification eliminates immune activation and improves translation of nucleoside-modified, protein-encoding mRNA. Nucleic Acids Res. 39(21): e142.
[4] Baiersdörfer et al. (2019) A Facile Method for the Removal of dsRNA Contaminant from In Vitro-Transcribed mRNA. Ther. Nucleic Acids 15: 26.
[5] Wienert et al. (2018) In vitro transcribed guide RNAs trigger an innate immune response via RIG-I pathway. PLoS Biol. 16 (7): e2005840.
[6] Kim et al. (2018) CRISPR RNAs trigger innate immune responses in human cells. Genome Res. 28 (3) :367.

文件下载	文件内容	资源说明
	CNRNT501-超纯高产T7RNA合成试剂盒	操作手册
	CNRNT501-超纯高产T7RNA合成试剂盒相关单页	宣传单页

搜索历史清除全部记录

超纯高产T7RNA合成试剂盒

产品组分

文件资源

营销中心

注意事项

FAQ