搜索历史清除全部记录

最多显示8条历史搜索记录噢~

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

昵称 | 退出

首页

CuAAC反应配体检测试剂盒(THPTA&BTTAA)

CuAAC反应配体检测试剂盒(THPTA&BTTAA)，CuAAC Reaction Ligand Test Kit (THPTA & BTTAA based)，适用于进行铜（Cu(I)）催化的叠氮化物-炔烃点击化学反应（CuAAC），可处理叠氮化物或炔烃修饰的生物分子，以及含有代谢功能化炔烃或叠氮化物修饰生物分子的细胞。它能直接对比BTTAA和THPTA，从而为您的实验设置找到最合适的Cu(I)稳定配体。更多视频请关注视频号【艾维缔】。哔哩哔哩【IVDSHOW】。抖音【军哥聊表观】。

关键词

所属分类

表观酶活检测

目录号

CNCLK075

获取报价

猜你喜欢

产品描述
产品组分
文件资源
营销中心
注意事项
FAQ
文献追踪

For general laboratory use.

Shipping: shipped at ambient temperature

Storage Conditions: store at 4 °C
Short term exposure (up to 1 week cumulative) to ambient temperature possible.

Shelf Life: 12 months after date of delivery

Description:
The CuAAC Reaction Ligand Test Kit is suitable to perform Copper (Cu(I))-catalyzed Azide-Alkyne Click chemistry reactions (CuAAC) with Azide- or Alkyne- modified biomolecules and cells containing metabolically functionalized Alkyne- or Azide-modified biomolecules. It allows a direct comparison of BTTAA and THPTA to find the most suitable Cu(I)-stabilizing ligand for your experimental set-up.

1 Kit provides sufficient amounts to perform 25 CuAAC experiments each with THPTA and BTTAA à 200 μl using 2 mM CuSO₄ (copper source), 10 mM THPTA or 10 mM BTTAA (Cu(I)-stabilizing ligands) and 100 mM Na-Ascorbate (reduction reagent) in 100 mM Na-Phosphate reaction buffer.

Content:
Copper source:
1 x 10 mg CuSO₄ (M = 159.6 g/mol), #CLK-MI004)

Cu(I) stabilizing ligands:
1 x 25 mg THPTA (M= 434.5 g/mol, #CLK-1010)
1 x 25 mg BTTAA (M= 430.5 g/mol, #CLK-067)

Reduction Reagent:
2 x 200 mg Na-Ascorbate (M = 198.1 g/mol, #CLK-MI005)

Reaction Buffer:
1 x 30 ml 100 mM Na-Phosphate Buffer, pH 7

10 ml ddH₂O

Materials required but not provided:

Alkyne-or Azide-functionalized substrates e.g.
a) fixed and permeabilized cells containing metabolically functionalized Alkyne- or Azide-modified biomolecules.
b) cell lysate containing metabolically functionalized Alkyne- or Azide-modified proteins.
c) Alkyne- or Azide-functionalized biomolecules such as DNA, RNA or oligonucleotides.

(Picolyl)-Azide or Alkyne detection reagent and appropriate solvent (e.g. DMSO)

For labeling of fixed and permeabilized cells:
Washing solutions e.g. PBS containing 3% BSA
Fixation solution e.g. PBS containing 3.7% formaldehyd
Permeabilization solution e.g. PBS containing 0.5% Triton X-100
Mounting medium for imaging
Additional labeling reagent such as nuclear stain or antibody

1. Introduction

Copper (Cu(I))-catalyzed Azide-Alkyne Click chemistry reactions (CuAAC) describe the reaction of an Azide-functionalized molecule A with a terminal Alkyne-functionalized molecule B that results in a stable conjugate A-B via a Triazole moiety.

Since terminal Alkynes are fairly unreactive towards Azides, the efficiency of CuAAC reactions strongly depends on the presence of a metal catalyst such as copper ions in the +1 oxidation state (Cu(I)).

Different copper sources, reduction reagents and Cu(I) stabilizing ligands are available however, for most bioconjugation applications the combination of the Cu(II) salt CuSO₄ as copper source, a water-soluble Cu(I) stabilizing ligand such as THPTA or BTTAA and sodium ascorbate as a reduction reagent is recommended.^[1-3] BTTAA promotes a higher reaction efficiency under some experimental conditions.^[3]

The use of Picolyl-Azide reagents instead of conventional Azide reagents can further increase the reaction efficiency and decrease the required final CuSO₄ concentration due to the internal copper chelating moiety.^[4] Especially the combination with BTTAA as ligand may allow you to use a decreased copper concentration while maintaining similar reaction efficiencies achieved with traditional Azide reagendts.

The set-up of a CuAAC reaction is based on the following general three-step procedure:

Prepare a mix of Alkyne- and Azide functionalized molecules in an appropriate reaction buffer.
Prepare a CuSO₄: Cu(I)-ligand premix, add it to the Azide- Alkyne solution and mix briefly.
Add Na-Ascorbate as reduction reagent at last to start the reaction.

The CuAAC Reaction Ligand Test Kit provides sufficient amounts to perform 25 CuAAC experiments each with THPTA and BTTAA à 200 μl using 2 mM CuSO₄, 10 mM THPTA (or 10 mM BTTAA) and 100 mM Na-Ascorbate in 100 mM Na-Phosphate reaction buffer.

General protocols for labeling of biomolecules (see 3.) and labeling of fixed and permeabilized cells containing metabolically functionalized Alkyne- or Azide-modified biomolecules (see 4.) are outlined below. Individual optimization might however be required for different CUAAC labeling experiments as well as for critical reaction parameter e.g. final CuSO₄ concentration, CuSO₄:ligand ratio, detection reagent concentration.

Hong et al.^[2] and Presolski et al.^[1] provide useful background information on the influence of CuSO₄ concentration, CuSO₄: ligand ratio and reaction buffer type that may be used as a starting point if optimization is required.

2. Preparation of stock solutions

Please note: The concentration of stock solutions (2.1 to 2.3) is suitable to prepare 200 and 500 μl assays containing 2 mM CuSO₄, 10 mM THPTA or 10 mM BTTAA and 100 mM Na-Ascorbate (see 3.1/3.2 and 4.3/4.4 respectively). Adjustments might be required if different assay volumes or final compound concentrations are used (see 3. and 4.).

2.1 THPTA and BTTAA stock solution (Cu(I) stabilizing ligand)

Add an appropriate amount of ddH₂O (Tab. 1), vortex until the compound is completely dissolved and spin down briefly.
Prepare aliquots to avoid repeated freeze-thaw-cycles and store at -20 °C.
The solution is stable up to 1 year at -20 °C.
BTTAA is less soluble than THPTA. If required, heat shortly up to 70°C to achieve a clear solution

Table 1 Volume of ddH₂O required for a 250 mM THPTA or 50 mM BTTAA stock solution.

THPTA	Concentration of stock solution	Amount of ddH₂O
25 mg	250 mM	230 μl
BTTAA
25 mg	50 mM	1163 μl

2.2 CuSO₄ stock solution (copper source)

Add an appropriate amount of ddH₂O (Tab. 2), vortex until the compound is completely dissolved and spin down briefly.
Prepare aliquots to avoid repeated freeze-thaw-cycles and store at -20 °C.
The solution is stable up to 1 year at -20 °C.

Table 2 Volume of ddH₂O required for a 100 mM CuSO₄ stock solution.

CuSO₄	Concentration of stock solution	Amount of ddH₂O
10 mg	100 mM	628 μl

2.3 Na-Ascorbate stock solution (reduction reagent)

Add an appropriate amount of ddH₂O (Tab. 3), vortex until the compound is completely dissolved and spin down briefly.
Prepare aliquots to avoid repeated freeze-thaw-cycles and store at -20 °C.
The solution is stable up to 1 year at -20 °C.

Please note: Do not use solutions that appear brown. Freshly prepared, fully functional Na-Ascorbate solutions are colorless to slightly yellow and turn brown upon oxidization thereby losing their reduction capability.

Table 3 Volume of ddH₂O required for a 1 M Na-Ascorbate stock solution.

Na-Ascorbate	Concentration of stock solution	Amount of ddH₂O
200 mg	1 M	1010 μl

2.4 (Picolyl)-Azide detection reagent stock solution

(Picolyl)-Azide detection reagents are not provided within this kit.
Add an appropriate amount of suitable solvent e.g. DMSO to achieve a stock solution concentration of 10 mM for Azide detection reagents and 500 μM for Picolyl-Azide detection reagents.
Final concentrations of Azide or Alkyne detection reagents may range from 2 μM to 100 μM. Final concentrations of Picolyl-Azide detection reagents may range from 0.5 to 5 μM (see 3.4).
If the molar amount of Alkyne-groups can be calculated, we recommend starting with a 10-fold molar excess of Azide-functionalized detection reagent

3. General protocol for CLICK labeling of biomolecules

The protocol below is intended as a general guideline however, individual optimization might be required.

The amount of provided reagents is sufficient to perform 25 CuAAC experiments each with THPTA and BTTAA à 200 μl using 2 mM CuSO₄, 10 mM THPTA (or 10 mM BTTAA) and 100 mM Na-Ascorbate in 100 mM Na-Phosphate reaction buffer.

3.1 Prepare CuSO₄:THPTA - and CuSO₄:BTTAA -Premix

Please note: Both the final CuSO₄ concentration as well as CuSO₄:THPTA (or BTTAA) ratio are critical parameters for CuAAC reaction efficiency. A final CuSO₄ concentration of 2 mM and a CuSO₄:THPTA (or BTTAA) ratio of 1:5 is recommended as a starting point for labeling of Azide- or Alkyne-functionalized biomolecules with a correspondingly labeled detection reagent. Individual optimization for each assay is strongly recommended. Minimum CuSO₄ concentration: 50 μM.

Prepare the CuSO₄:THPTA (or BTTAA)-Premix freshly for each experiment.
Allow all solutions to warm up to room temperature.
Mix the appropriate amount of 100 mM CuSO₄ and 250 mM THPTA (or 50 mM BTTAA) stock solution (Tab. 4) by vortexing and spin down briefly.
12 μl CuSO₄:THPTA (or 44 μl BTTAA)-Premix (1 Assay) is sufficient for the preparation of 500 μl CLICK reaction cocktail (see. 3.2).

Table 4A Pipetting scheme for CuSO₄:THPTA-Premix (ratio 1:5).

Compound	Final conc.	1 Assay
100 mM CuSO₄ stock solution (see 2.2)	33.33 mM	4 μl
250 mM THPTA stock solution (see 2.1)	166.66 mM	8 μl

Table 4B Pipetting scheme for CuSO₄:BTTAA-Premix (ratio 1:5).

Compound	Final conc.	1 Assay
100 mM CuSO₄ stock solution (see 2.2)	9.1 mM	4 μl
50 mM BTTAA stock solution (see 2.1)	45.45 mM	40 μl

3.2 Perform CLICK labeling

Please note: The protocol below describes CuAAC labeling of an Alkyne-functionalized biomolecule (e.g. cell lysate containing Alkyne-functionalized proteins) with an Azide-functionalized detection reagent (e.g. Azide-functionalized fluorescent dye). It can be used vice versa as well (Azide-functionalized biomolecule and Alkyne-functionalized detection reagent).

Allow all solutions to warm up to room temperature.
Final assay volume: 200 μl.
Refer to Tab. 6 for appropriate amounts of stock solutions.
Mix an Alkyne-functionalized biomolecule (see Tab. 5) with an appropriate amount of 100 mM Na-Phosphate reaction buffer, pH 7 to achieve a final volume of 167 μl if the CuSO₄:THPTA-Premix is used or a final volume of 135 μl if the CuSO₄:BTTAA-Premix is used.

Table 5 Starting amount of Alkyne-functionalized biomolecules.
Please note: The stated amounts are intended for an orientation only. They may need to be adjusted depending on the final read-out or downstream processing after CLICK reaction.

Substrate	Final Amount	Recommended final assay volume
Cell lysate containing Alkyne-functionalized proteins	50 μg	200 μl
Single Alkyne-functionalized oligonucleotide	5-10 nmol	20-50 μl
Multiple Alkyne-functionalized DNA or RNA generated by enzymatic incorporation of correspondingly labeled nucleotides	3-15 pmol^*	20-50 μl

^*e.g. 3 pmol correspond to 1.5 μg of a 1500 bp RNA fragment or 1 μg of a 500 bp DNA fragment.

Add 1 μl of a 10 mM Azide- functionalized detection reagent stock solution (see 2.4) vortex and spin-down briefly (final concentration: 50 μM). If the molar amount of Alkyne-groups can be calculated, we recommend starting with a 10-fold molar excess of Azide-functionalized detection reagent.
Add 12 μl CuSO₄:THPTA (or 44 μl BTTAA)-Premix (see. 3.1), vortex and spin down briefly.
Add 20 μl 1M Na-Ascorbate stock solution (see 2.3) to initiate the reaction, vortex and spin down briefly.
Incubate samples 30 – 60 min at room temperature or 37°C (protected from light).
Alkyne-functionalized biomolecules are now CLICK-labeled and ready for downstream processing and/or analysis.

Table 6 Pipetting scheme for a 200 μl CLICK reaction assay. Please add the compounds exactly in the order described below.

Pipetting scheme using CuSO₄/THPTA-Premix

Compound	Final conc./amount	1 Assay (200 μl)
Alkyne-functionalized biomolecule	see tab. 5	X μl
100 mM Na-Phosphate reaction buffer, pH 7	100 mM	ad 167 μl
10 mM Azide-functionalized detection reagent stock solution (not provided, see 2.4)	50 μM^[1]	1 μl
33.33 mM / 166.66 mM CuSO₄:THPTA-Premix (see 3.1)	2 mM / 10 mM	12 μl
1 M Na-Ascorbate stock solution (see 2.3)	100 mM	20 μl

Pipetting scheme using CuSO₄/BTTAA-Premix

Compound	Final conc./amount	1 Assay (200 μl)
Alkyne-functionalized biomolecule	see tab. 5	X μl
100 mM Na-Phosphate reaction buffer, pH 7	100 mM	ad 135 μl
10 mM Azide-functionalized detection reagent stock solution (not provided, see 2.4)	50 μM^[1]	1 μl
9.1 mM / 45.45 mM CuSO₄:BTTAA-Premix (see 3.1)	2 mM / 10 mM	44 μl
1 M Na-Ascorbate stock solution (see 2.3)	100 mM	20 μl

^[1]Final concentrations of Azide or Alkyne detection reagents may range from 2 μM to 100 μM. Final concentrations of Picolyl-Azide detection reagents may range from 0.5 to 5 μM. We recommend starting with 50 μM or 5 μM, respectively in case the molar amount of Alkyne-groups is unknown. If the molar amount of Alkyne-groups can be calculated, we recommend starting with a 10-fold molar excess of Azide-functionalized detection reagent. Concentrations can be titrated down in case of high background or up in case of low signal.

4. General protocol for CLICK labeling of fixated and permeabilized cells containing metabolically functionalized Alkyne- or Azide-modified biomolecules

The protocol below is intended as a general guideline however, individual optimization might be required.

The amount of provided reagents is sufficient to perform 10 CuAAC experiments each with THPTA and BTTAA à 500 μl using 2 mM CuSO₄, 10 mM THPTA (or 10 mM BTTAA) and 100 mM Na-Ascorbate in 100 mM Na-Phosphate reaction buffer.

4.1 Metabolically label cells with an Alkyne or Azide-functionalized substrate

Cultivate cells on coverslips under conditions that ensure optimal growth of cell type.
Add Alkyne- or Azide-functionalized substrate at the desired final concentration and cultivate for an appropriate time under conditions optimal for metabolic incorporation of the modified substrate.

4.2 Fixate and permeabilize cells

Please note: The fixation with 3.7% formaldehyde in PBS and subsequent permeabilization with 0.5% Triton X-100 is a general guideline. Optimization might be required. Different reagent concentrations, different fixation and permeabilization reagents (e.g. methanol or saponin) or TBS as buffer solution intstead of PBS can be used as well. Permeabilization is not required for cell surface or lipid component labeling.

Remove cultivation medium
Transfer each coverslip to a well of a 6-well plate
Add 1 ml of 3.7% formaldehyde in PBS for fixation and incubate for 15 min. at room temperature.
Remove fixation reagent and wash 2-3 times with PBS containing 3% BSA.
Add 1 ml of Triton X-100 in PBS and incubate for 20 minutes at room temperature for permeabilization.

4.3 Prepare CuSO₄:THPTA- and CuSO₄:BTTAA-Premix

Please note: Both the final CuSO₄ concentration as well as CuSO₄:THPTA (or BTTAA) ratio are critical parameters for CuAAC reaction efficiency. A final CuSO₄ concentration of 2 mM and a CuSO₄:THPTA (or BTTAA) ratio of 1:5 is recommended as a starting point for labeling of fixed and permeabilized cells containing metabolically Azide- or Alkyne-functionalized biomolecules. Individual optimization for each assay is strongly recommended. Minimum CuSO₄ concentration: 50 μM.

Prepare the CuSO₄:THPTA (or BTTAA)-Premix freshly for each experiment.
Allow all solutions to warm up to room temperature.
Mix the appropriate amount of 100 mM CuSO₄ and 250 mM THPTA (or 50 mM BTTAA) stock solution (Tab. 7) by vortexing and spin down briefly.
30 μl CuSO₄:THPTA (or 110 μl BTTAA)-Premix (1 Assay) is sufficient for the preparation of 500 μl CLICK reaction cocktail (see. 4.4).

Table 7A Pipetting scheme for CuSO₄:THPTA-Premix (ratio 1:5).

Compound	Final conc.	1 Assay	10 Assays
100 mM CuSO₄ stock solution (see 2.2)	33.33 mM	10 μl	100 μl
250 mM THPTA stock solution (see 2.1)	166.66 mM	20 μl	200 μl

Table 7B Pipetting scheme for CuSO₄:BTTAA-Premix (ratio 1:5).

Compound	Final conc.	1 Assay	10 Assays
100 mM CuSO₄ stock solution (see 2.2)	9.1 mM	10 μl	100 μl
50 mM BTTAA stock solution (see 2.1)	45.45 mM	100 μl	1000 μl

4.4 Prepare CLICK reaction cocktail

Please note: Prepare CLICK reaction cocktail freshly for each experiment and use it immediately but definitely within 15 minutes after preparation. 500 μl CLICK reaction cocktail (1 Assay) is sufficient to label one 18x18 coverslip.

Allow all solutions to warm up to room temperature.
Refer to Tab. 8 for appropriate amounts of compound stock solutions.
500 μl CLICK reaction cocktail (1 Assay) is sufficient for a 18x18 coverslip.
Add an appropriate amount of Azide- or Alkyne detection reagent solution to the reaction buffer, vortex and spin-down briefly.
Add CuSO₄:THPTA (or BTTAA)-Premix, vortex and spin down briefly.
Add Na-Ascorbate, vortex and spin down briefly.

Table 8 Pipetting scheme for CLICK reaction cocktail. Please add the compounds exactly in the order described below.

Pipetting scheme using CuSO₄:THPTA-Premix

Compound	Final conc.	1 Assay (500 μl)	10 Assays (5 ml)
100 mM Na-Phosphate reaction buffer, pH 7	100 mM	419 μl	4.19 ml
10 mM Azide or-Alkyne detection reagent stock solution (not provided, see 2.4)	20 μM^[1]	1 μl	10 μl
33.33 mM / 166.66 mM CuSO₄:THPTA-Premix (see 3.3)	2 mM / 10 mM	30 μl	300 μl
1 M Na-Ascorbate stock solution (see 2.3)	100 mM	50 μl	500 μl

Pipetting scheme using CuSO₄:BTTAA-Premix

Compound	Final conc.	1 Assay (500 μl)	10 Assays (5 ml)
100 mM Na-Phosphate reaction buffer, pH 7		339 μl	3.39 ml
10 mM Azide or-Alkyne detection reagent stock solution (not provided, see 2.4)	20 μM^[1]	1 μl	10 μl
9.1 mM / 45.456 mM CuSO₄:BTTAA-Premix (see 3.3)	2 mM / 10 mM	110 μl	1100 μl
1 M Na-Ascorbate stock solution (see 2.3)	100 mM	50 μl	500 μl

^[1]Final concentrations of Azide or Alkyne detection reagents may range from 2 μM to 100 μM. Final concentrations of Picolyl-Azide detection reagents may range from 0.5 to 5 μM. We recommend starting with 20 μM or 5 μM, respectively. Concentrations can be titrated down in case of high background or up in case of low signal.

4.5 Perform CLICK labeling of fixated and permeabilized Alkyne- or Azide-labeled cells

Remove the permeabilization buffer (see 4.2) and wash 2-3 times with PBS containing 3% BSA.
Add 500 μl CLICK reaction cocktail (see 4.4) to each well containing one coverslip. Ensure that the coverslip is entirely covered with solution.
Incubate samples 30 – 60 min at room temperature (protected from light).
Remove CLICK reaction cocktail and wash cells 1-2 times with PBS containing 3% BSA.
Remove wash solution.
For nuclear staining with DAPI or Hoechst 33342 or antibody labeling wash once with PBS, remove PBS and proceed with staining according to the manufacturer’s protocol.

产品组分

内容	型号	规格	储存温度
CuAAC反应配体检测试剂盒(THPTA&BTTAA)	CNCLK075-01	25次	-20°C
CuAAC反应配体检测试剂盒(THPTA&BTTAA)	CNCLK075-02	50次	-20°C
操作手册	1	1	常温

文件资源

营销中心
注意事项

保存建议厂家推荐蓝冰运输。当您收到产品后，按照说明书建议保存于-20°C。
FAQ
Selected References:
[1] Presolski et al. (2011) Copper-Catalyzed Azide-Alkyne Click Chemistry for Bioconjugation. Current Protocols in Chemical Biology 3:153.
[2] Hong et al. (2011) Analysis and Optimization of Copper-Catalyzed Azide-Alkyne Cycloaddition for Bioconjugation. Angew. Chem. Int. Ed. 48:9879.
[3] Besanceney-Webler et al. (2011) Increasing the Efficiacy of Bioorthogonal Click Reactions for Bioconjugation: A Comparative Study. Angew. Chem. Int. Ed. 50:8051.
[4] Uttamapinant et al. (2012) Fast, Cell-Compatible Click Chemistry with Copper-Chelating Azides for Biomolecular Labeling. Angew. Chem. Int. Ed. 51:5852.

Endothelial soluble epoxide hydrolase links polyunsaturated fatty acid metabolism to oxidative stress and atherosclerosis progression

Redox Biology  |  2025 Jun 01

Metabolic Glycoengineering Enables the Ultrastructural Visualization of Sialic Acids in the Glycocalyx of the Alveolar Epithelial Cell Line hAELVi

Raphael Brandt, Sara Timm, ..., Elena Lopez-Rodriguez

Frontiers in Bioengineering and Biotechnol…  |  2021 Jan 14  |  33520965

  Supplementary   Tag‐Free Internal RNA Labeling and Photocaging Based on mRNA Methyltransferases

Anna Ovcharenko, Florian P. Weissenboeck, Andrea Rentmeister

Angewandte Chemie (International Ed. in En…  |  2020 Dec 22  |  33095964

文件下载	文件内容	资源说明
	CNCLK075-CuAAC反应配体检测试剂盒(THPTA&BTTAA)	操作手册
	CNCLK075-CuAAC反应配体检测试剂盒(THPTA&BTTAA)相关单页	宣传单页

搜索历史清除全部记录

CuAAC反应配体检测试剂盒(THPTA&BTTAA)

产品组分

文件资源

营销中心

注意事项

FAQ