搜索历史清除全部记录

最多显示8条历史搜索记录噢~

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册

昵称 | 退出

首页

高产T7 AZ594RNA标记试剂盒(CTP)

高产T7 AZ594RNA标记试剂盒(CTP)，HighYield T7 AZDye594 RNA Labeling Kit (CTP-based)，利用 CTP-PEG5-AZDye594 体外转录制备随机 AZDye594 标记的 RNA 探针。这种探针非常适合原位杂交和 Northern 印迹实验。更多视频请关注视频号【艾维缔】。哔哩哔哩【IVDSHOW】。抖音【军哥聊表观】。

关键词

所属分类

RNA修饰检测

目录号

RNT401AZ594

获取报价

猜你喜欢

产品描述
产品组分
文件资源
营销中心
注意事项
FAQ
文献追踪

For research use only.

Description:
HighYield T7 AZDye594 RNA Labeling Kit (CTP-based) is designed to produce randomly AZDye594-modified RNA probes via in vitro transcription. Such probes are ideally suited for in situ hybridization and Northern Blot experiments. AZDye594 (structural analog to Alexa Fluor® 594) is a hydrophilic dye with increased photostability compared to Fluorescein.

CTP-PEG5-AZDye594 is efficiently incorporated into RNA as substitute for its natural counterpart CTP using an optimized T7 RNA Polymerase Mix and HighYield T7 Reaction Buffer. The HighYield T7 LabelOpt Buffer provides additional optimization flexibility tailored to the requirements of each assay setup. 35 % CTP-PEG5-AZDye594 substitution typically results in an optimal balance between reaction and labeling efficiency. Individual optimization of CTP-PEG5-AZDye594/CTP ratio however, can easily be achieved with the single nucleotide format. The resulting AZDye594-modified RNA probe can subsequently be detected by fluorescence spectroscopy.

The kit contains sufficient reagents for 20 labeling reactions of 20 μl each (35 % CTP-PEG5-AZDye594 substitution, 2.5 mM ATP, GTP, UTP, 0.2 mM CTP, 0.1 mM CTP-PEG5-AZDye594).

A 20 μl reaction yields about 5-7 μg RNA after 30 min incubation (1 μg T7 control template, 1.4 kb RNA transcript). Yields may however vary depending on the template (promotor design, sequence length, secondary structure formation).

Shipping: shipped on gel packs

Storage Conditions: store at -20 °C
avoid freeze/thaw cycles

Shelf Life: 12 months

Spectroscopic Properties: λ_exc 590 nm, λ_em 617 nm, ε 92.0 L mmol^-1 cm^-1 (Tris-HCl pH 7.5)

Content:
HighYield T7 RNA Labeling Polymerase Mix
2x 40 μl, incl. RNase inhibitor and 50 % glycerol (v/v)

HighYield T7 Reaction Buffer
1x 200 μl (10x), HEPES-based

DTT
1x 150 μl (100 mM)

HighYield T7 LabelOpt Buffer
1x 400 μl (5x)

ATP - Solution
1x 100 μl (100 mM)

GTP - Solution
1x 100 μl (100 mM)

CTP - Solution
1x 100 μl (100 mM)

UTP - Solution
1x 100 μl (100 mM)

CTP-PEG5-AZDye594
1x 10 μl (5 mM)

T7 G-initiating control template (1.4 kbp)
1x 10 μl (200 ng/μl), 1.4 kbp PCR fragment plus T7 class III phi6.5 promotor resulting in approx. 1400 nt RNA transcript

PCR-grade water
1x 1.2 ml

To be provided by user
T7 Promotor-containing DNA template
RNA purification tools
RNAse-free DNAse I (optional)

1. Important Notes (Read before starting)
1.1 Prevention of RNAse contamination
Although a potent RNase Inhibitor is included, creating a RNAse-free work environment and maintaining RNAse-free solutions is critical for performing successful in vitro transcription reactions. We therefore recommend

to perform all reactions in sterile, RNAse-free tubes using sterile pipette tips.
to wear gloves when handling samples containing RNA.
to keep all components tightly sealed both during storage and reaction procedure.

1.2 Template requirements

Template type: Linearized plasmid DNA or PCR products containing a double-stranded T7 class II phi2.5 or class III phi6.5 promotor region upstream of the target sequence. Transcription initiation from T7 class III promotor is generally more efficient than initiation from T7 class II promotor.
Minimum T7 promotor sequences:

T7 class III phi6.5 promotor
5'-TAATACGACTCACTATAGNN…-3’
Bold: First base incorporated into RNA, NN: ideally CG

or

T7 class II phi2.5 promotor
5'-TAATACGACTCACTATTANN…-3'
Bold: First base incorporated into RNA, NN: ideally GG
Template quality: DNA template quality directly influences yield and quality of transcription reaction. Linearized plasmid DNA needs to be fully digested and to be free of contaminating RNase, protein and salts. We recommend selecting restriction enzymes that generate blunt ends or 5'-overhangs and purification by phenol/chloroform extraction. A PCR mixture can be used directly however, better yields will usually be obtained with purified PCR products (e.g. via silica-membrane based purification columns).

2. Preparation of working solutions
2.1 Preparation of 10 mM ATP/GTP/UTP working solution

Thaw 100 mM ATP, 100 mM GTP and 100 mM UTP solutions on ice, voretex and spin-down briefly.
Prepare a 1:10 dilution with PCR-grade water to achieve a final concentration of 10 mM (e.g. 5 μl 100 mM ATP + 5 μl 100 mM GTP + 5 μl 100 mM UTP + 35 μl PCR-grade water).
10 mM ATP/GTP/UTP working solution can be stored at -20°C. Avoid freeze/thaw cycles.

2.2 Preparation of 10 mM CTP working solution

Thaw 100 mM CTP solution on ice, voretex and spin-down briefly.
Prepare a 1:10 dilution with PCR-grade water to achieve a final concentration of 10 mM (e.g. 5 μl 100 mM CTP + 45 μl PCR-grade water).
10 mM CTP working solution can be stored at -20 °C. Avoid freeze/thaw cycles.

3. In vitro Transcription protocol
The protocol is optimized for 0.5 μg - 1 μg DNA template.
An optimal balance between reaction and labeling efficiency is typically achieved with 35% CTP-PEG5-AZDye594 substitution following the standard protocol below however, individual optimization might improve results for individual applications (e.g. variation of CTP-PEG5-AZDye594/CTP ratio between 30 - 50 % or choice of reaction buffer).

Place HighYield T7 RNA Labeling Polymerase Mix on ice.
Thaw all remaining components at room temperature (RT), mix by voretexing and spin down briefly.
Assemble all components at RT to a nuclease-free microtube (sterile pipette tips) in the following order:
Mix PCR-grade water, HighYield T7 Reaction Buffer and DTT or HighYield T7 LabelOpt Buffer by voretexing and spin down briefly.
Add nucleotide solutions and template DNA, vortex and spin down briefly.
Add HighYield T7 RNA Labeling Polymerase Mix vortex and spin down briefly.
Incubate for 30 min at 37 °C in the dark (e.g. PCR cycler). Depending on the RNA probe individual optimization may increase product yield (2h – 4h at 37 °C).

Assay set up using HighYield T7 Reaction Buffer (10x)

Component	Volume	Final concenctration
PCR-grade water	X μl
HighYield T7 Reaction Buffer (10x)	2 μl	1x
100 mM DTT	2 μl
10 mM ATP/GTP/ UTP working solution (s. 2.1)	5 μl	2.5 mM
10 mM CTP working solution (s. 2.2)	0.4 μl	0.2 mM
5 mM CTP-PEG5-AZDye594	0.4 μl	0.1 mM
Template DNA	X μl	0.5 - 1 μg
HighYield T7 RNA Labeling Polymerase Mix	2 μl
Total volume	20 μl

Assay set up using HighYield T7 LabelOpt Buffer (5x)

Component	Volume	Final concenctration
PCR-grade water	X μl
HighYield T7 LabelOpt Buffer (5x)	4 μl	1x
10 mM ATP/GTP/ UTP working solution (s. 2.1)	5 μl	2.5 mM
10 mM CTP working solution (s. 2.2)	0.4 μl	0.2 mM
5 mM CTP-PEG5-AZDye594	0.4 μl	0.1 mM
Template DNA	X μl	0.5 - 1 μg
HighYield T7 RNA Labeling Polymerase Mix	2 μl
Total volume	20 μl

Please note: Reagents for the following steps are not provided within this kit.

DNA template removal (optional)
Depending on the down-stream application, removal of template DNA might be required. We recommend a salt-resistant, high efficiency DNAase such as Turbo™DNAse (ThermoFisher). Follow the manufacturer instructions.

RNA purification
Purification of RNA is required for certain applications such as measurement of AZDye594-labelled RNA probe concentration. Spin column purification will remove proteins, salts and unincorporated nucleotides. Please follow the manufacturer instructions and ensure that the columns match with product size and possess a sufficient binding capacity (e.g. RNA Clean & Concentrator™ columns (Zymo Research) or Monarch® RNA Cleanup kit (NEB)). Other RNA purification methods such as LiCl precipitation may work but have not been tested.

Total RNA quantitation
RNA concentration can be determined by absorbance measurement at 260 nm (A₂₆₀) according to the Law-of-Lambert-Beer (A₂₆₀ = 1 correspond to 40 μg/ml ssRNA).

Incorporation rate of fluorophore
The efficiency of RNA labeling can be estimated by calculating the ratio of incorporated fluorophores to the number of bases (dye / base).
[Please note: Blanc correction with probe buffer solution is required.]

1. Measurement of the nucleic acid-dye conjugate absorbance:
Measure the absorbance of the labeled RNA fragment at 260 nm (A₂₆₀) and at the excitation maximum (λ_exc)of dye (A_dye).

2. Correction of A₂₆₀ reading:
To obtain an accurate nucleic acid absorbance measurement, the contribution of the dye at 260 nm needs to be corrected. Use the following equation:

A_base = A₂₆₀ - (A_dye x CF₂₆₀)
Correction Factor for AZDye594: CF₂₆₀ = 0.43

3. Calculation of dye to base ratio by the law of Lambert-Beer (A = c x ε x d):

dye/base ratio = (A_dye x ε_base) / (A_base x ε_dye)

Extinction coefficients:
AZDye594: ε_dye = 92,000 cm^-1 M^-1
ssRNA: ε_base = 12,030 cm^-1 M^-1 (average, 50% GC)

4. Calculation of the degree of labeling (DOL)
The degree of labeling (DOL) indicates the number of dyes per 100 bases.
DOL = 100 x dye/base ratio

Example: A dye/base ratio of 0.02 corresponds to a DOL of 2 that corresponds to 2 dyes per 100 bases.

产品组分

内容	型号	规格	储存温度
高产T7 AZ594RNA标记试剂盒(CTP)	RNT101AZ594-01	20次x20ul	-20°C
高产T7 AZ594RNA标记试剂盒(CTP)	RNT101AZ591-02	40次x20ul	-20°C
操作手册	1	1	常温室温

文件资源

营销中心
注意事项

保存建议厂家推荐蓝冰运输。当您收到产品后，按照说明书建议保存于-20°C。
FAQ

文件下载	文件内容	资源说明
	RNT101AZ594-高产T7 AZ594RNA标记试剂盒(CTP)	操作手册
	RNT101AZ594-高产T7 AZ594RNA标记试剂盒(CTP)相关单页	宣传单页

搜索历史清除全部记录

高产T7 AZ594RNA标记试剂盒(CTP)

产品组分

文件资源

营销中心

注意事项

FAQ